2024 Chevrolet LCF 4500HG Regular Cab RWD, Harbor WorkMaster Service Utility Van (Stock #CF14101)
Vehicle Notes
Read More…
Chassis Details
Vehicle Options
- Audio system feature, 2 speakers
- Vehicle Application Truck
- Tires, rear, 225/70R19.5 G, LRR (low rolling resistance) tubeless steel belted radial, all-season (Standard on 4500 HG model only.)
- Seat, front high back bucket driver and passenger tricot cloth covered reclining high back driver seat with single two-occupant fold down passenger seat (STD)
- Lighting, interior dome
- Windshield washer bottle access on passenger side dash when passenger-side door is open
- Air conditioning, single-zone manual, integral in-dash mounted
- GVWR, 14,500 lbs. (6577 kg) (Standard on 4500 HG model only.)
- Emissions, 50 state certification
- Wheelbase, 109" (276.9 cm)
- Incomplete vehicle certification
- Steering column, Tilt-Wheel
- Windshield wiper, pulse, wet arm
- Rear axle, 4.30 ratio (Standard on 4500 HG model only.)
- Steering wheel, urethane
- Drivetrain, rear-wheel drive
- Floor mats
- Grille, Silver
- Windows, power
- Exhaust, single outlet
- Tires, front, 225/70R19.5 G, LRR (low rolling resistance) tubeless steel belted radial, all-season (Standard on 4500 HG model only.)
- Frame, ladder-type channel frame. Full C section straight frame 33.5" (85.1 cm) wide. Yield strength 44,000 psi, section modulus 7.20 cu.in. and RBM 316,800 lb-ft/in per rail.
- Wheels, 19.5" x 6", K steel (Standard on 4500 HG model only.)
- Brake, parking, cable actuated, internal expanding drum type, transmission-mounted
- Cup holders
- Daytime Running Lamps
- Rear suspension, 12,900 lbs. (5851 kg), multi-leaf, semi-elliptical steel alloy. Includes shock absorbers
- Cruise control, electronic, automatic
- Transmission, 6-speed automatic, 6L90-E Hydra-Matic with lock-up converter and overdrive. Ratios: Gear and Ratios 4.027, 2.364 ,1.532, 1.152, 0.852, 0.667, Rev. 3.064:1 (STD)
- Battery, 750 cold-cranking amps, 12-volt single, maintenance free, frame-mounted battery box
- LED Headlamps
- Air cleaner, heavy-duty, 11" diameter dry paper single element. Air cleaner canister standard with air restriction gauge. Back of cab location.
- Assist steps
- Fuel tank, 38.6 Gallon, (146L), rectangular fuel tank mounted between frame rail with electric type fuel pump (mounted in tank). Through the rail fuel fill.
- Engine, 6.6L V8 SIDI, GMPT-V8 8 cylinder V Iron block, four cycle overhead valve water cooled 6.6L SIDI V8 350 hp [261 kW] @ 4500 rpm, 425 lb.-ft of torque [575.8 N-m] @ 3800 rpm. Electronically controlled direct fuel injection. Six bolt main cap design for heavy-duty performance. Engine Control Module (ECM) and Transmission Control Module (TCM) engine control system. Engine cruise control, engine oil cooler, High Idle Mode (1200 rpm). (STD)
- Seat trim, Cloth
- Storage, door pockets
- Storage, seatback pockets
- Driver Information Center
- Glass, tinted
- Door locks, power
- Brakes, 4-wheel antilock, front and rear disc
- Front axle, 6,830 lbs. (3098 kg), reverse Elliot "I"-beam includes integral hydraulic power steering, with an 18.8-20.9:1 gear ratio
- Rear axle, 4.30 ratio
- Medium Ash Gray, Cloth seat trim
- PIO, Mirror, outside left-hand and right-hand with integral convex mirrors, heated, dual remote controls
- PIO, Forward Collision Alert and Lane Departure Warning (Mobileye)
- Arc White
- Preferred Equipment Group
- PIO, Audio System, Enhanced audio system
- Transmission, 6-speed automatic, 6L90-E Hydra-Matic with lock-up converter and overdrive.
- PIO, Rear Vision Camera
- Engine, 6.6L V8 SIDI, GMPT-V8 8 cylinder V Iron block, four cycle overhead
- PIO, Back-up alarm
- Seat, front high back bucket driver and passenger
- Ship Thru, Ocean Freight Surcharge
- PIO, Remote Keyless Entry
- TIRES, FRONT, 225/70R19.5
- 50-STATE EMISSION
- 38.6 GALLON FUEL TANK
- View All
Body Details
WorkMaster Features
The WorkMaster secures the tools of your trade unlike any other enclosed service body. Constructed with steel, built like a vault, the “walk-in” WorkMaster is designed for heavier-duty cutaway vans…and we have been known to mount them on a chassis or two. The WorkMaster is constructed in different lengths and heights to meet your every tool, material storage, and interior height (up to 6’3?) requirement. Need to carry more than your typical van? This is your truck!
- Tightest security system in town, featuring double-bit keys and a Master Lock internal locking system
- Modern gas shocks on each side opening door to keep them open during loading and unloading
- Rear side access door for storage of conduit or other long (10-ft.) materials
- 12" step bumper and side-wall grab handles for ease of entrance into the bed
- Interior ladder storage on hooks mounted along inside shelf Weights up to 300 lbs. lighter than competing brands using FRP
- Weather shield system around locks, doors, and hinges, preventing leaks and securing the tools of your trade.
- Neoprene door seals, water-proof gaskets, self-sealing stainless steel rivets, and silky smooth three-point door latches with Teflon glides.
Body Installed by
Call For Pricing |
Pricing Details
List Price | $67,250 |
Body Costs | + $17,293 |
Dealer Discount | - $5,000 |
Price | $79,543 |
Vehicle available NOW in Santa Rosa, CA
Contact Platinum Chevrolet for more info.
(707) 383-4110